22” x 40” Omega 2 Axis CNC/Teach Lathe, Model OLC-2240, Fagor 8055 Control, New 2018
CNC Lathes$49,500.00 USD |
22” x 40” Omega 2 Axis CNC/Teach Lathe, Model OLC-2240, Fagor 8055 Control,
New 2018, 15 Hours Used For Demo
The spindle is mounted with high pressure P4 angular contact ball bearings, providing outstanding radial and trust loads.
The spindle is precision machined from high quality alloy steel, hardened precision ground and dynamically balanced, making it ideal for heavy cutting.
The bed is a single casting of Certified Meehanite, with large crossed ribs along the bed way for maximum rigidity and precision.
All ways are induction hardened and the mating slide surfaces are hand scrapped Turcite “B” to assure harmonic reduction and smooth slide movement. The bedways are ground in one setup to assure the optimal alignment to the headstock.
Precision double nut ballscrews are mounted in angular contact bearings on both sides to maintain the highest positioning accuracy.
The lubrication system is controlled by the control‘s PLC and monitors duration and frequency of the lube cycle. Any abnormality of the cycle is noted in an alarm message.
High volume coolant system with ample pressure for heavy and finish cutting is standard equipment.
Inspect under Power in Or Lebanon NJ Warehouse
Machine Imported and Supported By Reinen Machine Sales
Greg Reinen
908-541-0055
Tailstock | Yes |
Live Tooling | No |
Sub Spindle | No |
Swing 22”
Swing Over Cross slide 13”
Center Distance 40”
Spindle Bore 3”
Mount D1-8
Speeds 0 – 1800 RPM Gear Drive Infinitely Variable
HP 15
Cutting Rate X 118 IPM
Z 196 IPM
Rapids X 450 IPM
Z 450 IPM
Tail stock Travel 5.9”
Taper 4 MT
Fagor 8055 CNC Control
MPG Hand Wheels
Controlled Spindle Speeds
Constant surface Speed
XZ are C5 Ball Screws
Coolant System
Control will still carry a 1 Year Warranty